Home › HDMI vs DisplayPort: Which Is Better for Your Monitor in 2026?

HDMI vs DisplayPort: Which Is Better for Your Monitor in 2026?
The bandwidth ladder
| Connection | Bandwidth | What it realistically drives |
|---|---|---|
| HDMI 2.0 | 18Gbps | 1440p at 144Hz; 4K at 60Hz |
| HDMI 2.1 (true FRL) | Up to 48Gbps | 4K at 120Hz uncompressed and beyond; consoles' home |
| DisplayPort 1.4 | 32.4Gbps (+ DSC compression) | 1440p at 240Hz; 4K at 144Hz+ with DSC |
| DisplayPort 2.1 (UHBR20) | 80Gbps | 4K at 240Hz with no compression at all — still rare, flagship-only |
Why PC gamers land on DisplayPort
Open any gaming guide on this site and the pattern repeats: the headline refresh rate lives on DisplayPort. The LG 27GS75Q-B is a 180Hz monitor over DP and a 144Hz monitor over its HDMI 2.0 ports; the Alienware AW2725DM runs 180Hz on DP, 144Hz on HDMI; the pattern holds across MSI, AOC and Dell alike, because monitor makers budget their fastest signalling to DP and treat HDMI as the compatibility port. Variable refresh was also born here — FreeSync and G-Sync both arrived over DisplayPort years before HDMI VRR existed. If a monitor is on your desk and a PC is under it, DisplayPort is the default answer, and the HDMI ports are for the second machine.
The console exception
Consoles have no DisplayPort, and they do not need it. A PS5 — and a PS5 Pro, whose HDMI output our PS5 Pro monitor guide documents as capped at 32Gbps — fits inside HDMI 2.1 FRL with room to spare, running 4K at 120Hz in YUV 4:2:2. Xbox Series X is the same story. For a console desk, the buying question is not HDMI versus DP; it is whether the monitor's HDMI port is a genuine FRL port, because the label alone does not guarantee it.
The label trap, with a named example
HDMI's version number describes a feature set, not a guaranteed bandwidth — and manufacturers may label a port "HDMI 2.1" while wiring it for the older TMDS signalling. Dell's G2724D is the documented case: its spec sheet states the "HDMI 2.1" port supports 1440p at 144Hz over TMDS, while its DisplayPort reaches 165Hz. Nothing about that is visible from the logo on the box. Our HDMI 2.1 explainer walks through how to check a spec sheet for the letters FRL before buying; it is the single most useful cable skill a monitor buyer can learn.
USB-C is DisplayPort in disguise
The one-cable laptop desk runs on this same contest's quiet third entry: USB-C carries video as DisplayPort Alt Mode, so a USB-C monitor input is functionally a DisplayPort with charging attached — 65W on Dell's office models, up to 140W on Thunderbolt hubs. If your question is really "one cable or two", our USB-C monitors guide is the comparison you want; the cable carrying the picture is DisplayPort either way.
Buying the cable itself
Three rules cover almost every failure. Match the cable to the job: for HDMI, the words that matter are "Ultra High Speed" (the certified 48Gbps class); for DisplayPort, buy VESA-certified cables and treat unbranded long cables as suspects. Keep DisplayPort short: full-bandwidth DP runs are happiest at 2 metres or under; beyond that, certified or active cables. Blame the cable last but check it early: a screen that caps at a lower refresh, flickers at high refresh, or drops signal is very often a cable running out of bandwidth — swapping in a known-good certified cable is the cheapest diagnostic in PC building.
Update history
November 11, 2026: Published: HDMI vs DisplayPort by bandwidth — what each connection drives at 1440p and 4K, the console exception, and the TMDS label trap.
